Att AUDIX Networking 585-300-903 Bedienungsanleitung PDF herunterladen (Seite 108)

10-2 DCP Mode 1 Installation and Administration

________________________________________________________________________________________________

System 75, Generic 1, and Generic 3 Administration

Administration depends on whether the customer is using static (high-speed data only) or dynamic (voice

and high-speed data) switched 56 access.

NOTE

Any Generic 1 switches in a 56 Kbps network that includes a Generic 2 must be running at

least Issue 7.2 software.

• Static Access: For static (high-speed data only) 56 Kbps switched access, the switch must be

administered as follows:

— Using the add trunk-group form, set the comm type to DATA and administer the switch for

wink in/wink out.

— Using the change system-parameters features form, set the off-premise tone

detect to 25.

— Using the change ds1 circuit pack form, set the signaling mode ﬁeld to robbed-bit

and set either ZCS or B8ZS to match the CO.

• Dynamic Access: For dynamic (voice and high-speed data) 56 Kbps switched access, the switch must

be administered as follows:

— Using the add trunk-group form, set the comm type to RBAVD, the baud rate (or bit rate) to

19.2, and administer the switch so it matches the central ofﬁce trunk type.

— Using the change system-parameters features form, set the off-premise tone

detect to 25.

— Using the change ds1 circuit pack form, set the signaling mode ﬁeld to robbed-bit

and set either ZCS or B8ZS to match the CO.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 267 268

Keine Kommentare

Att AUDIX Networking 585-300-903 Bedienungsanleitung Seite 108